| After-sales Service: | Support |
|---|---|
| Warranty: | 15months |
| Heating Mode: | Convective |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Product Description
Our small-scale Spray dryers are designed especially for carrying out test work and exploring the possibilities of spray drying
as well as small-scale and trail production. It meets the demand for a sanitary, flexible, and easy-to-handle lab spray
dryer. Small quantities of solutions, suspensions, or emulsions can be dried into representative powder samples, and the
process data required for scale-up to industrial production can be retrieved. The typical product applications for the spray
dryers are free-flowing powders, agglomerated powders, and fine powders.
Typical Application
Pharmaceuticals and biology, food, Biocides, Ceramics, Catalysts, Detergents, Minerals, Fungicides, Dyes, Metallic Powders,
Agricultural Products
Equipment structure
1. Feeding system
The feeding system consists of a peristaltic pump and a feeding pipeline. The amount of material and liquid entering the
the high-speed centrifugal atomizer can be adjusted according to the outlet temperature.
2. Atomization system
The atomization system uses a centrifugal atomizer, which uses the high-speed rotational force of the rotary atomizer to throw
out the droplets and flow downward in a spiral. The droplet size can be adjusted by changing the linear velocity of the atomizer.
3. Heating system
The heating system consists of an air filter, a blower, an electric heater, and an inlet air temperature sensor.
4. Drying chamber
The drying chamber is mainly composed of a drying chamber, lighting lamps, sight glass, air inlet pipes, air outlet pipes, etc.
The atomization radius, residence time, and processing air volume are designed according to the evaporation of water and
the properties of the material.
The drying tower is operated with slight negative pressure. The upper part of the drying chamber is a hot air inlet, equipped
with a volute and a hot air distributor. The hot air is evenly distributed through the hot air distributor and exchanges heat evenly
and effectively with the droplets to dry the droplets into a dry powder product. The temperature sensor is used to record the
inlet air temperature and the outlet air temperature.
5. Material recovery system
The material recovery system consists of a cyclone separator. After drying, the dust-carrying gas enters the cyclone separator,
the gas-solid separation is carried out by the cyclone, the air is discharged, and the dried materials are collected and separated.
6. Piping system
the piping system consists of induced fans and stainless-steel ducts.
7. Control system
The programmable HIM control each important function device and fault alarm, optional automatic touch screen.
| Model | LPG-5 | LPG-10 | LPG-15 | LPG-25 |
| Max water Evaporation (kg/h) | 5 | 10 | 15 | 25 |
| Temp of Air Inlet (ºC) | 140~350ºC | |||
| Temp of Out Inlet (ºC) | 60~130ºC | |||
| Droplets contact with hot air | Open Cycle, Co-current Flow | |||
| Atomization Type | Rotary atomizers | |||
| Atomizer Speed(rpm) | 24000~30000 | 24000~30000 | 18000~24000 | 18000~24000 |
| Atomizer Disk (mm) | 50 | 80 | 100 | 100 |
| Air Heating | Electricity | Steam plus electricity | ||
| Drying Chamber Diameter | 1000 | 1200 | 1600 | 2000 |
| Equipment Dimension (L*W*H m) | 1.6×1.1×2.2 | 2.7×1.5×2.8 | 3.0×1.8×3.4 | 4.0×2.7×4.5 |
Wuxi Wiscon mechanical and Electrical Equipment Co., Ltd. is an integrated company specializing in powder production for the food,
pharmaceutical, chemical, and biological industries since 2016.
Main products categories cover the following equipment:
a. Drying Equipment: rotary atomizer spray dryer, pressure nozzle spray dryer, tray drying oven.
b. Powder Mixer: Conical Screw mixer, Ribbon mixer, Ploughshare Mixer, V-shaped mixer, and Double cone mixer for bulk materials.
c. Vibration Screener: Rotary vibratory Screener, Tumbler Screening Machine, and Centrifugal shifter for fine powder separation.
d. Grinding Machine: Universal Mill, Air Classified Mill for food and Pharmaceutical.
e. Granulating Equipment: High Shear Mixer Granulator and Fluid Bed Granulator
f. Vacuum conveyor: Pneumatic vacuum Feeder for BIC, Bagging machine, powder mixer, sieve, etc.
Questionnaire for Lab Spray Dryer
In order to quote you the right lab spray dryer price, Please specify as much information as possible
- What is the percentage of solids going to the spray dryer?
- What is the target particle size?
- What is the desired finish product moisture content?
- Is the finished powder hydrophilic, flowable, or sticky?
- What is the viscosity of the liquid slurry?
- Is the liquid feed material a solution or dispersion?
- What is the temperature profile?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}